Fire test

The GWP plastics laboratory carries out fire tests or fire tests with which the flammability, fire behavior, heat resistance and much more. can be determined.

The tests are mainly carried out according to national and international standards, but we also develop customer-specific tests and combine them with other stresses. For example, we determine strength values on CFRP tanks with simultaneous exposure to flames.

Our fire chambers according to DIN 75200, FMVSS 302, UL94 and many more. are particularly suitable for classifying the combustibility of plastics and for determining the burning rate of components.

Fire tests for motor vehicles, machines for agriculture and forestry
Flammability and fire rate according to DIN 75200, FMVSS 302.

Fire classification test UL94
Fire tests with 50 W test flame horizontally and vertically

Fire test to determine the oxygen index (LOI)

Fire test with glow wire

Fire test to determine the heat release rate ( MARHE )

Schmelzverhalten
din en iso 5659-2 Brandprüfung
ISO 5660-1
Brennversuch
  • Service

Seite 1 von 7

Dynamic differential thermal analysis (DSC) according to DIN EN ISO 11357-1

Methods for recording various properties, such as glass transition, phase transformations, chemical reactions, oxidation stability and heat capacity


Further Informations

Norm

Contact

Dr. Stefan Loibl

stefan.loibl@gwp.eu
+49 8106 9941 65

Determination of ash according to DIN EN ISO 3451-1

Method for determining the ash for a range of plastics. e.g. analysis of filler content or proportion of fibres for reinforcement.


Further Informations

Norm

Contact

Dr. Stefan Loibl

stefan.loibl@gwp.eu
+49 8106 9941 65

Biegeversuch Biegeprüfung

Determination of the bending properties according to DIN EN ISO 178

Method for determining the bending properties of rigid and semi-rigid plastics.


Further Informations

Norm

Contact

Kristina Trenz

kristina.trenz@gwp.eu
+49 8106 9941 54

Kerbschlagbiegeversuch

Determination of Charpy impact properties according to DIN EN ISO 179-1

Notched bar impact test for the determination of the Charpy impact strength of plastics.


Further Informations

Norm

Contact

Kristina Trenz

kristina.trenz@gwp.eu
+49 8106 9941 54

Zugversuch nach DIN EN ISO 527-2

Determination of tensile properties according to DIN EN ISO 527-2

Determination of the tensile deformation behaviour with determination of the tensile strength, the tensile modulus and the tensile stress/strain relationship.


Further Informations

Norm

Contact

Kristina Trenz

kristina.trenz@gwp.eu
+49 8106 9941 54

Gitterschnitt nach DIN EN ISO 2409

Cross-cut test on coatings according to DIN EN ISO 2409

Test method for estimating the resistance of a coating to separation from the substrate.


Further Informations

Norm

Contact

Max Diedering

vertrieb@gwp.eu
+4981069941144

Kratztest Crockmeter

Determination of resistance to scratching with a linear lifting device according to DIN EN ISO 21546

Method for determining the settling behaviour of coating materials.


Further Informations

Norm

Contact

Dr. Ulrike Rantzsch

ulrike.rantzsch@gwp.eu
+49 341 392981 68

Ritzhärteprüfung nach Wolff-Wilborn

Determination of the hardness of coatings by testing with pencils according to ISO 15184

Method for determining the coating hardness by pushing pencils.


Further Informations

Norm

Contact

Dr. Ulrike Rantzsch

ulrike.rantzsch@gwp.eu
+49 341 392981 68

Colour fastness tests – Colour fastness to rubbing according to DIN EN ISO 105-X12

Test method for determining the resistance of the colour of textiles.


Further Informations

Norm

Contact

Dr. Ulrike Rantzsch

ulrike.rantzsch@gwp.eu
+49 341 392981 68

Determination of the gloss value according to DIN EN ISO 2813

Method for determining the gloss value of coatings at 20°, 60° or 85°


Further Informations

Norm

Contact

Dr. Ulrike Rantzsch

ulrike.rantzsch@gwp.eu
+49 341 392981 68

Page 1 of 7